 |
|
| ‘Arsun’ AR series of Radial Drills are designed to offer rigidity, precision and easiness in operation.
|
| |
|
Salient Features
- Heavy Duty - 50-mm drilling in steel.
- Wide range of 8 spindle speeds for drilling, tapping, reaming and boring operations.
- Five auto power feeds: 0.05 to 0.25-mm per revolution.
- Auto feed disengages at preset depth as well as too high or abnormal drilling pressure.
- Hardened and lapped alloy steel gears fitted on splined shafts in main drive gearbox runs in an oil bath.
- Hardened and precision ground spindle sleeve.
- Double column construction for rigidity and effortless centering.
- Arm and drill-head guide ways are precisely hand scraped for minimum play and rigid clamping of drill-head with the arm.
- Well adequately ribbed base-plate, inner column & arm for maximum rigidity and minimum deflection.
|
|
| |
|
| Capacity |
| Drilling in Steel |
mm |
40 |
| Drilling in C.I. |
mm |
60 |
| Tapping in Steel |
mm |
42 |
| Tapping in C.I. |
mm |
52 |
| Boring in Steel |
mm |
100 |
| Drilling Head |
| Spindle nose taper |
|
MT4 |
| Spindle stroke |
mm |
300 |
| Nos. of spindle speed |
|
8 |
| Range of spindle speed |
rpm |
45 – 1150 |
| Nos. of power feeds |
|
5 |
| Range of power feeds |
mm/rev |
0.05 – 0.25 |
| Working Range |
| Column sleeve diameter |
mm |
300 |
| Column to spindle center min/max |
mm |
400 / 1250 |
| Base plate to spindle nose min/max |
mm |
385 / 1285 |
| Drilling head traverse |
mm |
850 |
| Arm traverse |
mm |
900 |
| Base Plate |
| Working surface |
mm |
1200 x 800 |
| Cast T-Slots: nos / width / pitch |
mm |
3 / 23 / 200 |
| Power |
| Main motor |
kw/rpm |
2.2 (3hp) / 1440 |
| Arm lifting motor |
kw/rpm |
1.5 (2hp) / 1440 |
| Weight |
| |
kg |
2800 |
|
| |
|
Standard Equipment
- Spindle Motor & Arm Lifting Motor
- Electrical suitable for 415V/50Hz/3Phase AC supply
- Box Table – 600x450x450-mm size
- 0.15 HP Coolant Pump with fittings
- Built-in Coolant Tank
- Operation & Maintenance Manual
|
