 |
|
| 38 mm Belt Driven Back Geared Radial Drilling Machine
|
| |
Salient Features
- Well adequately ribbed base plate, arm & arm bracket for maximum rigidity & minimum deflection.
- Wide range of 8 spindle speeds for drilling, tapping and reaming operations.
- Precisely honed bore for accurate smooth movement of spindle sleeve housing.
- Six splined EN8 steel spindle running in a set of 4 bearings offers rigidity and precision while drlling.
- Arm and drill-head guide ways are precisely hand-scraped for minimum play and rigid clamping of drill-head with arm.
- Strongly ribbed and thick walled base plate having built-in coolant tank.
|
|
|
| |
|
| Capacity |
| Drilling in Steel |
mm |
38 |
| Drilling in C.I. |
mm |
45 |
| Drilling Head |
| Spindle nose taper |
|
MT4 |
| Spindle stroke |
mm |
220 |
| Nos. of spindle speed |
|
8 |
| Range of spindle speed |
rpm |
70 - 2000 |
| Working Range |
| Column sleeve diameter |
mm |
180 |
| Column to spindle center min/max |
mm |
420 / 910 |
| Base plate to spindle nose min/max |
mm |
200 / 950 |
| Drilling head traverse |
mm |
475 |
| Arm traverse |
mm |
750 |
| Base Plate |
| Working surface |
mm |
630 x 800 |
| Cast T-Slots: nos / width / pitch |
mm |
3 x 225 |
| Width of cast slots |
mm |
18 |
| Width of base plate |
mm |
150 |
| Power |
| Main motor |
HP |
1.5 |
| Arm lifting motor |
HP |
0.5 |
| Weight |
| |
kg |
925 |
|
| |
|
Standard Equipment
- Work Table
- Motor Pulley
- Built-in Coolant Tank
Optional
- 'V' Belt (B26 / B46)
- Spindle Motor & Arm Lifting Motor
- Electrical suitable for 415V / 50Hz / 3Phase AC Supply
- 0.16 HP Coolant Pump with fittings
|
